Rust Converter - One quart will cover up to 130 sq. ft.

Description

Looking to get rid of rust on your metal surfaces? Fertan's Rust Converter is the best way to do it - simply apply it to the rust and watch it turn black, ready for painting. It also leaves a protective zinc coating that prevents rust from coming back for up to 6 months.
Fertan Rust Converter is the best way to remove rust from any metal surface. It's simple to use - just apply it to the rusted area and it will instantly turn it into a blackened metal that's ready for painting. It also leaves a protective zinc coating that prevents rust from coming back for up to 6 months.
RECOMMENDED FOR
: Long-term, protective rust treatment for maintenance interventions on previously painted, oxidized metal parts
Application:
If possible, sand the loose surface rust with sandpaper or by grinding.
Get rid of oil, grease, silicone and dirt. Use silicone remover if necessary.
Apply FERTAN Rust Converter with a brush, roller or spray gun and let it react at room temperature (20° C / 68 °F)  for at least 24 hours. For temperatures between (5° C – 19° C / 41 °F - 66 °F) let the product react for 48 hours. A black or even blue-violet surface is formed thereafter.
When application is performed in direct sunlight or hot conditions damp the surface after 1-2 hours.
Do not use the product below 5° C / 41 °F or frost!
Thereafter thoroughly rinse surface with water to remove the dust.
Do not adapt the surface mechanically.
Apply coating or paint on the surface within 6 months of the application.
After treatment / lacquering can be done with near all commercial products.
Filler, Primer (Epoxy Primer, Multi Metal Coating etc.)
Protective waxes (Underbody –cavity protection Wax, Rust Inhibitor etc.)
Stonechip Protection / EP resins