Eastwood Rust Encapsulator Platinum 1 Quart UV Resistant High-Tech Formula

Description

Rust Encapsulator Platinum is a high-performance, moisture-cured coating that encapsulates and stops rust from spreading.
Three times Stronger than Original Rust Encapsulator
Metallic Silver Finish
Apply Directly Over Surface Rust
Heat Resistance to 350 Degrees F
Apply with Brush or Spray
Rust Encapsulator Platinum can be used as a top coat or can be top-coated with almost any paint. It can be applied over bare metal or surface rusted areas. Brush or spray applied with conventional spray equipment. Rust Encapsulator Platinum is ideal for any type of rusted metal surface and can withstand temperatures up to 350 degrees F.
A single component aluminum pigmented coating
67% solids by weight
Proprietary additive increases product adhesion to rusted steel substrates- unmatched by competitive coatings
1 coat assures maximum protection
Brush, roller or spray applied
Paint Gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle
Re-coat able after 4 hrs.- if top coating after 48 hrs., scuff surface with 320 grit paper
2 hrs., tack-free
Easy to apply
Topcoat able with virtually any high-quality coating
Maximum service temp of 350° Fahrenheit
Recommended Substrates and Prep
Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron
Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel
Remove any grease, oils or other surface contaminants with a solvent such as PRE or Acetone
Apply by brush, roller or spray"